-
J-Bend 409 Stainless Steel / .065 Wall (Choose Your Size) LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is suitable for normally aspirated header applications and...$31.78 -
Garret T3 Exhaust Discharge Flange (5 Bolt) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. This 5-bolt flange fits standard 5-bolt T3/T4 turbo exhaust housings, including the turbos...$30.85 -
CNC-Machined External Wastegate Block-Off Plate Streamline your turbo setup with precision. Our CNC-machined Wastegate Block-Off Plate is the professional solution for builders switching from an external to an internal wastegate setup, or for those...$26.68 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$26.47 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$26.47 -
Exhaust Header Stud Set Upgrade your exhaust hardware and ensure a leak-free seal with our premium header mounting stud set. Factory exhaust manifold studs feature a center shoulder that frequently interferes with the thicker flanges of performance...$25.81 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...$24.41 -
Merge Collector (3-1 1/2″ into 1-2 ¼″) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it...$22.01 -
Air Injection Block-Off Plate Kit Streamline your exhaust system and eliminate bulky emissions hardware with the LCE Air Injection Block-Off Kit. Designed to securely seal the air injection ports on your exhaust manifold or header, this kit is the...$21.12 -
Air Injection Tube Block-off Plate Kit (Trail Gear) Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains 2 plates that will allow you to install our headers without the air injection tube...$19.99 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.70
-
fast shipping
Speed Delivery