-
Transfer Case Shift Base If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter, for shifter, see Part #: 2051665. This...$49.99 -
Axle Breather Relocation Kit This Breather Relocation Kit was specifically designed to relocate your rear axle breather when welding up a rear axle gusset or any type of mount or bracket. This kit uses our Creeper Breather to keep any dirt, mud, or...$49.99 -
Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the slave...$48.22 -
OEM Clutch Release Fork Sub-Assembly OEM Toyota Shift Fork For Clutch Release. OEM Toyota Part #: 31204-20071 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...$44.42 -
Stainless Steel 11" Clutch Line Don't get stuck with a leaking or inoperable clutch hydraulic system! This kit replaces the stock rubber line that extends down to your clutch slave cylinder.When your stock lines get old, the rubber starts to expand...$43.46 -
Transfer Case Shifter Boot (OEM) It's common for the factory transfer case boot to degrade over time, crumble and disintegrate. This often results in dirt and mud getting into the transfer case shifter then into the transfer case. This simple Factory...$40.16 -
Spindle Stud Kit When assembling your spindles gaskets does it feel like your all thumbs? This kit contains (16) studs and flanged nuts. With studs installed it's easier to install the spindle gaskets. Gaskets are placed on the studs one at a time,...$39.99 -
Differential Stud Eliminator Kit When you come home after a trail ride, do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do you have to tap and drill the studs out and replace...$39.99 -
Solid Pinion Spacer Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer...$39.99 -
Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...$39.99 -
Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...$39.99 -
OEM Clutch Release Fork Sub-Assembly OEM Toyota OEM Clutch Release Fork Sub-Assembly. OEM Toyota Part #: 31204-35031 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$37.09
-
fast shipping
Speed Delivery