Weber 32/36 Carb & Intake Performance Package 20R (Electric Choke)
One of the best ways to get some extra performance out of your little Toyota 20R is to upgrade the carburetor and intake manifold. It is always important to match your upgrades to each other to make sure everything works well together, so with this kit LC Engineering has done all the homework to make sure that you get the perfect combination of parts to maximize your performance.
Includes: Weber 32/36 Carb, Intake Manifold and Weber Air Cleaner w/Filter
This Carb & Intake Performance Package contains a single plane intake manifold, Weber 32/36 carburetor kit and Chrome Air Cleaner w/K&N Filter
Downdraft Intake Manifold
This 20R intake manifold will work perfectly to get you the most performance possible from your engine. With a large open plenum and runners, this manifold will outflow your stocker and supply your performance engine with enough airflow to make the most horsepower possible. This manifold is equipped with a Weber carburetor flange so you can bolt your performance carburetor on the manifold without having to use any adapters. This manifold has all the same vacuum and sensor ports as your stock manifold so you don't have to worry about adapting different fittings to gether to get all your vacuum lines and temp sensors hooked back up!
Weber 32/36 Carburetor Kit
The Weber 32/36 kit utilizes a 32/36 progressive Weber carb, and is designed to upgrade your Toyota with an economical performance carb. Increase horsepower as well as improve drivability and fuel economy compared to the stock carburetor. The Weber 32/36 is the optimum carburetor to replace a worn out or hard to maintain factory carb. The 32/36 progressive is a great carb for low-end power and fuel economy. If you've got a mildly built motor or daily driver, the 32/36 is the way to go for torque, low-end power, and fuel economy. This is an electric choke carb.
Parts Warning: Most Early Trucks and Celica's will have hood clearance issues if used with bigger filters.
Optional Parts Info
The manifold in this kit is designed to use a rubber style thermostat gasket (supplied with manifold). There are a few other upgrades available for this manifold so take a minute to browse through the parts below to see if you will need any of them for your application. If you have any questions please contact one of our sales reps to help you determine what parts you may or may not need.
Requires fuel pressure regulated to 2.5-3psi
Part #1032009 Intake Manifold Gasket
Part #1032032 Water Block Plate(Under Manifold)
Part #1016015 Pro Water Block Off Kit
Part #1032050 Intake Manifold Plug Kit
Part #1016038 EGR Block Plate Kit
Part #1035048 Intake Manifold Stud Kit
Part #1033023 Weber Spiral Spacer
Factory fuel line from mechanical pump is roughly 1/16" smaller than Weber
Regulator/Carb fuel line. Slight pressure is all that is needed to fit the smaller line.
If you have one of our cylinder heads (or plan on getting one in the future) we can also port match your new intake to any of our cylinder head stages.
Alternate Kit Options
LC Engineering offers these Carb & Intake Performance Applications with Weber 32/36 carburetors or with Weber 38 carburetors. We also offer with the Billet Air Cleaner or with a K&N chrome air cleaner. Check out the parts below for these different options.
#1030000 20R Kit w/Weber 32/36 w/Manual Choke
#1030003 20R Kit w/Weber 32/36 w/Electric Choke
#1030006 20R Kit w/Weber 38 w/Electric Choke
#1030009 20R Kit w/Weber 38 w/Manual Choke
#1030036 22R Kit w/Weber 32/36 & Billet Air Cleaner
#1030039 22R Kit w/Weber 32/36 & K&N Air Cleaner
#1030042 22R Kit w/Weber 38 & Billet Air Cleaner
#1030045 22R Kit w/Weber 38 & K&N Air Cleaner
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.