Glowshift Single Gauge A-Pillar Pod
GlowShift's Universal Single A-pillar Pod is a single gauge pod that is designed to be installed on virtually any vehicle and will house (1) 2 1/16" (52mm) gauge...
LC Engineering Large DecalÂ
Proudly display your allegiance to the Toyota performance experts with the official LC Engineering Large Decal. Measuring a bold 26" x 8", this high-quality graphic is...
2-Bolt Stub Connector
(You Choose Size)
2 1/4" Flange
This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25"...
Weld On Flat Tab Standard
(You Choose Size)
TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1...
CNC-Machined External Wastegate Block-Off Plate
Streamline your turbo setup with precision. Our CNC-machined Wastegate Block-Off Plate is the professional solution for builders switching from an...
Stock Replacement U-Joint
(Heavy Duty w/ Zerk)
Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up...
Fuel Pressure Gauge
(1.5" Diameter / 0-60 Psi)
These fuel pressure gauges are for EFI engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable,...
Flip Socket
(19mm / 21mm)
For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard...
Garrett T3 Exhaust Discharge Flange
(4-Bolt)
Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5"...
Aluminized Heat Sheath
(1.25" x 3')
This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.
This product...
Micro Activation Switch & Bracket
This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as...
K&N Filter Care Service Kit
(Aerosol / 99-5000)
K&N Recharger Kit 99-5000 is designed to service your K&N oiled cotton air filter when it gets dirty. The kit comes with K&N Power Kleen air filter...