-
Hub Stud Kit Don’t need an entire hub stud kit? Well here you go, in the single version. Kit Contains: (1) Stud (1) Cone washer (1) Lock washer (1) Nut (8mm) Contact our Tech Support Line for further information at 928-575-2174...$12.50 -
OE Breather Hose (Front Of Valve Cover) OE Toyota hose comes off the valve cover and goes to intake manifold. Replaces OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part...$12.50 -
Rear Inner Axle Seal Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you remove the axle. Contact our Tech Support Line for...$12.43 -
Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective. This injector connector is just what you need. It...$12.39 -
Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective. This injector connector is just what you need. It...$12.36 -
Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...$12.36 -
Gasgacinch (Gasket Sealer 4 oz.) There's nothing else that compares with the performance of Gasgacinch. It lasts longer and prevents leaks that others can't. The 4 ounce can offer the best option for light usage and do-it-yourself automotive...$12.34 -
OE PCV Hose This is the OE 22RE PCV hose for the PCV Valve on top of the valve cover. Replaces OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$12.15 -
OE Wheel Bearing Grease Seal (Front Hub) Fits in the back side of the front IFS hubs, will be needed anytime you repack or replace front wheel bearings. You will need two seals in order to do your truck. NOTE: Not for Solid Axle applications. For...$11.89 -
Light Bar Tabs (Weld-On) Weld-On Light Tabs are CNC formed from 1/8" thick 1010 steel, coped for 1 1/2" or 1 3/4" O.D. tubing, and have a 1/2" sized bolt hole. These tabs also make great generic weld-on tabs for things like seats, seatbelts, or just...$11.73 -
Inner Axle Seal When you swap out a Birfield joint it's a good idea to change the inner axle seal at the same time to keep the knuckles clean of weeping oil. This is a great part to keep in your tool box for trail side repairs. This product should...$11.58 -
Thermostat (190 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...$11.34
-
fast shipping
Speed Delivery