Greasable Shackle Bolt (You Choose Size) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. Contact our Tech Support Line for...

Trail-Link 3 Front Shock Strap (Compressed / Extended) Individual Trail-Link Three™ Front 3-Link strap. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Trail-Link Four Axle 20 Degree Lower Link Mount (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a...

Front 3-Link Lower Link Axle Bracket (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Creeper Joint Shackle Mounts (You Choose Size) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint...

Shackle Spacer For Extra Flex Springs (Front / Rear) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. Contact our Tech...

Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...

Upper Link Mount (OEM / Rock Assault) Trail-Gear customers tend to drive where the majority would never ventureâ€"climbing over rocks, hills, and rugged off-road terrain. Hobbies like that require occasional maintenance to the chassis and...

Front Leaf Spring Hanger (W/ Options) This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. Contact our Tech Support Line for further information at 928-575-2174...

Poly-Vinyl Shock Boots (Black / Pair) These high quality shock boots protect the chrome-hardened piston rod from dirt, dust, mud and other contaminants - extending the life of your shocks. Features: Not Vehicle Specific Poly-Vinyl Shock...

Pro Comp Front Shocks (PRO-X Twin Tube Shock Absorber) The Pro Comp PRO-X Twin Tube Shocks offer good damping performance and are intended for vehicles that see a lot of paved roads with the occasional off-road adventure. They feature a high-quality...