Suspension

Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...

Ultimate Chevy 63" Spring Swap Kit (Low Range Off-Road) Why put a 1/2-ton Chevrolet leaf spring on a Toyota Hilux Pickup, 4Runner or Tacoma? Simply put - they ride like a dream on and off road! The difference between Chevy's springs and the stock...

Upper Link Mount (OEM / Rock Assault) Trail-Gear customers tend to drive where the majority would never ventureâ€"climbing over rocks, hills, and rugged off-road terrain. Hobbies like that require occasional maintenance to the chassis and...

Front Leaf Spring Hanger Kit (Extra-Flex Springs) Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pick-Ups and 4Runners. Kit designed to work with many 3" - 6" lift aftermarket springs. Frame jigs make it easy to place shackle tubes in...

LCE Front U-Bolt Flip Kit (1979-1985 Pickup / 1984-1985 4Runner) Introducing another addition to our lineup that you've all been eagerly awaiting! If you've been keeping tabs on our Project 85' build, you might have spotted our specially designed...

Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Creeper Joint Shackle Mounts (You Choose Size) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint...

LCE Rear U-Bolt Flip Kit (1979-1995 Pickup / 1984-1995 4Runner) Introducing another addition to our lineup that you've all been eagerly awaiting! If you've been keeping tabs on our Project 85' build, you might have spotted our specially designed...

Front Leaf Spring Hanger (W/ Options) This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. Contact our Tech Support Line for further information at 928-575-2174...

Shackles Front Offset 6" (Pair) If you need to relocate your rear shackle mounts in order to install longer suspension springs, it's the perfect time to upgrade to Trail-Gear leaf spring shackles. These 1/4 in. steel plate units are stronger than the...

Shackles Front Offset 5" (Pair) If you need to relocate your rear shackle mounts in order to install longer suspension springs, it's the perfect time to upgrade to Trail-Gear leaf spring shackles. These 1/4 in. steel plate units are stronger than the...

Shackles Front Offset 5.5" (Pair) These Trail Gear spring shackle kits are designed to replace the factory shackles with extreme lift kits. These spring shackle kits feature high grade polyurethane bushings and greasable bolts for superior service life...