Fuel Gauge Kit
(Carbureted)
If you are running a carburetor on your Toyota truck, this kit is a must-have and a great way to keep your fuel system running right. This kit provides you the ability to dial in the fuel pressure accurately to help your carburetor perform at its peak. This kit includes a custom made in the USA fuel line "T" fitting and a quality low-pressure gauge so you will know exactly how much pressure your fuel system is delivering to your carb, and this is very important when you are trying to correctly tune your carb to achieve peak performance.
NOTE: This gauge is intended to be used as a tool. Premature failure may result from leaving the gauge installed under the hood. Not for use in the cabin of the vehicle. If a fuel pressure regulator is needed, see Part #: 1035056.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
To open a printable PDF version of this instruction
CLICK HERE
Kit Contents:
- (1) - LC Low Pressure Fuel Gauge
- (1) - Fuel Pressure Gauge "T" Fitting
- (1) - Hex Socket Pipe Plug
To install, simply cut fuel delivery hose and place in-line. If you're installing a regulator, you'll want to install a "T" Fitting after regulator. You may have to "walk-it" onto each end of the fitting as it'll be very tight. Once "T" fitting is in place, thread gauge in.
NOTE: Do not use hand to tighten gauge. Failure to do so could result in damage to gauge. Please use wrench on backside of gauge to tighten.
After fuel pressure is set, remove gauge and plug w/ provided pipe plug. Leaving the gauge installed will result in gauge failure.
Low pressure LCE fuel gauge 
