Throttle Body Spacer Kit - 5VZ
Spacer Thickness: 1"
Gain: 5 HP
Opening Size: 62mm (2.441")
Just like our spacers for the 22RE and the 2RZ/3RZ, these spacers for the 5VZ V-6 feature our unique spiral bore to promote the tornado-like intake charge.
Another added benefit on the 5VZ is the elimination of the gasket protrusion that is inherent in the factory OEM stainless steel gasket.
By eliminating this pointless restriction, airflow into the motor is increased greatly. More air in equals more power! Add the extra airflow with the unique
spiraling effect from the spacer, and you're in for more power! Spacer and throttle linkage adapter are both hard anodized for durability and long lasting good looks.
Our kits include the billet aluminum spacer, throttle cable bracket adapter, and all gaskets and hardware required for installation.
We also include our exclusive Teflon heat isolation gasket to eliminate the power-robbing heat from transferring to the throttle body.
We ran one of these on our shop truck here and were greeted with a peak HP gain of 2.2HP@4600 RPM, and a peak torque gain of 4 Ft-Lbs@3500 RPM. More notably was
the increase in midrange. The increases in horsepower and torque were consistently 4-6 HP AND torque from 3500-5000 RPM!
NOTE: Not for street use in California
Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.