Fuel Filter
A frequently overlooked tune-up component is the fuel filter. While modern gasoline is highly refined, contaminants can still get in fuel anywhere from the filling of the transport...
Fuel Injector Rebuild Kit
LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. Don't forget the cap end which is sold separately, there are two...
Silicone Vacuum Hose
(3mm / 6mm / 8mm / 10mm )
Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest...
K&N Air Filter Oil
(99-0516)
K&N 99-0516 is a 12.25 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N...
K&N Air Filter Oil
(99-0504)
K&N 99-0504 is a 6.5 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N...
Fuel Pressure Gauge "T" Fitting
(5/16" Hose to 1/8" NPT)
This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs...
Silicone Adapter
(2.5“ I.D. to 2.75″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme...
Silicone Adapter
(2.5 “ I.D. to 3.0″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own...
-6AN Fuel Rail Fitting
(Fuel Inlet)
LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer.
NOTE: M14 x 1...
Union Bolt
(Fuel Rail)
LC Engineering offers this M14 x 1.25 replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails...
Fuel Injector Isolators
(Bottom)
To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC...
Injector Harness Adapter
(Denso to Bosch EV1)
This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the...