• Vacuum Advance Plug (Distributor) When removing the vacuum advance on your factory distributor, this plug will keep foreign debris from entering the hole and causing problems. Only for a Distributor with the vacuum advance removed, as in a race engine...
    $10.66
  • Single Wire O2 Sensor Relocation kit If your O2 location has moved due to an aftermarket header, this single wire kit will extend the lead on your current connection. Contact our Tech Support Line for further information at 928-575-2174...
    $10.66
  • Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...
    $10.25
    choose option
  • Pro Distributor Rotor The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...
    $9.38
  • Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...
    $7.45
  • NGK Spark Plug BPR5EGP (G-POWER PLATINUM) NGK G-Power Platinum spark plugs are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel efficiency. The small tip improves...
    $4.32