Quick Release Hinged Aluminum Bracket This quick release bracket is hinged for ease of use and are designed to securely hold your bottle at the proper angle for maximum flow through the siphon tube. Contact our Tech Support Line for further...

Toggle Activation Switch (Covered) This covered toggle switch enables performance enthusiasts to activate solenoids, fuel pumps, etc. This switch keeps you from accidentally blasting Nitrous into the engine before you are ready. Contact our Tech...

Push-Button Activation Switch (Momentary) This heavy duty push button (momentary) switch enables performance enthusiasts to activate solenoids, fuel pumps and most anything else. Contact our Tech Support Line for further information at...

Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...

Remote Push-Button Activation Switch (Water Resistant) The remote push button switch (water resistant) enables enthusiasts to activate solenoids, fuel pumps, and most anything else, while safely protecting the switch from water damage. Contact...

Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...

Standard Bottle Heater NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled to keep the bottle at 85 F. Powered by 12 Volt DC...

Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...

10 oz. Standard Bottle Bracket NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating. Contact our Tech...

Standard Steel Bottle Bracket (You Choose Size) NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating, or Nylon...

Nitrous Bottle Purge Valve (-4AN Line / -6AN Line) The primary purpose of a purge valve is to release trapped air or gaseous Nitrous from feed line(s). Helps to ensure consistent performances. And it looks cool, too. You've probably seen the Import or...

Cryogenic Air Intake (2.5" O.D. / 3" O.D.) The CryO2 is a revolutionary new, award-winning product designed to reduce the temperature of the air/fuel intake charge thus creating power. Through the science of aerodynamics and cryogenics, Design...