K&N Air Filter Oil
(99-0504)
K&N 99-0504 is a 6.5 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration...
Silicone Vacuum Hose
(3mm / 6mm / 8mm / 10mm )
Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the...
Fuel Pressure Gauge "T" Fitting
(5/16" Hose to 1/8" NPT)
This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...
Silicone Adapter
(2.5“ I.D. to 2.75″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...
Silicone Adapter
(2.5 “ I.D. to 3.0″ I.D.)
Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...
Fuel Injector Isolators
(Bottom)
To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC Engineering flow-matched fuel injectors include new isolators...
K&N Air Filter Cleaner
(99-0606)
K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. The 99-0606 Air Filter Cleaner will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to...
K&N Air Filter Oil
(99-0533)
K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...
Intake Manifold Stud Kit
This kit comes with all new studs to mount your manifold to your cylinder head. Replacing your stock intake bolts with studs will allow you to remove and reinstall your manifold numerous times without having to worry about...
Intake Manifold Gasket
(Lower / 8 Port)
LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This gasket...
Throttle Body Gasket
(Metal "D" Shape)
Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is...
Fuel Injector Top Grommets
This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets.
NOTE: Sold as a set of (4).
Contact our Tech Support Line for...