Performance and replacement parts for the 1st gen Toyota Tacoma — 2RZ-FE 2.4L, 3RZ-FE 2.7L, and 5VZ-FE 3.4L V6. Long blocks (including the LCE 5VZ replacement long block launched in 2025), turbo and supercharger kits, headers, suspension, and OEM-spec components.
Hall Sensor Mount
When installing our LC Pro Fuel Injection System on a 2RZ or 3RZ, this bracket mounts the Hall Effect Sensor perfectly to generate a signal from the crank pulley.
Contact...
2-Bolt Stub Connector
(You Choose Size)
2 1/4" Flange
This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25"...
Weld On Flat Tab Standard
(You Choose Size)
TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1...
Stock Replacement U-Joint 4WD
(Heavy Duty w/ Zerk)
Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints...
CNC-Machined External Wastegate Block-Off Plate
Streamline your turbo setup with precision. Our CNC-machined Wastegate Block-Off Plate is the professional solution for builders switching from an...
Fuel Injector Cup Set
When rebuilding your cylinder head or servicing your fuel system, don't risk performance-robbing vacuum leaks by reusing worn-out factory hardware. Unlike previous engine...
Stock Replacement U-Joint
(Heavy Duty w/ Zerk)
Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up...
Brass Freeze Plug
At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning...
Thermostat
(180 Degree)
Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature...
Header Stud Set
The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting...
Water Block Plate Kit
(Cylinder Head-Rear)
This block plate is used primarily on our billet race motors to block off the water passage on the back of the cylinder head.
Contact our Tech...
Fuel Pressure Gauge
(1.5" Diameter / 0-60 Psi)
These fuel pressure gauges are for EFI engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable,...
The first-generation Toyota Tacoma (1995–2004) is LCE's deepest Tacoma catalog. It is the platform that built our reputation in the Tacoma community, and it carries the three engines we have spent the most time building parts for: the 2RZ-FE 2.4-liter four-cylinder (1995–2000), the 3RZ-FE 2.7-liter four-cylinder (1995–2004), and the 5VZ-FE 3.4-liter V6 (1995–2004). All three engines have active buyer communities; the 5VZ-FE has been particularly significant since LCE launched the 5VZ replacement long block in August 2025.
Our 1st gen Tacoma catalog covers complete long blocks and crate engines, the LCE Stroker family, supercharger and turbo kits, header kits, master rebuild kits, suspension components (lift kits, lowering kits, leveling, shocks), off-road body (bumpers, sliders, skid plates), and the OEM-spec replacement parts that keep these trucks running well past 250,000 miles. The 1st gen Tacoma is the truck most associated with the Toyota truck reliability reputation in the post-Hilux era — and the parts we build are the same ones our team has been refining for the platform since its launch.
Browse 1st gen Tacoma parts above by system, or use these starting points: