-
Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system to for a quieter tone. This resonator features high temp long...$42.80 -
Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that "old school" sound, or we have used them as a resonator to quiet down your existing exhaust system. The 18" length is perfect for adding this resonator in conjunction...$42.80 -
Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...$42.80 -
Oil Filter Adaptor Plate 3/4 UNF-16 This aluminum sandwich plate makes it simple to install your Oil Pressure and Oil Temperature senders—no drilling or tapping required. Just: Remove your oil filter. Screw the plate on in...$41.75 -
OE Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...$41.27 -
LCE Project 85' Garage Banner 30" x 48" *Limited Edition For years our customers have been asking us for banners for their garages, well, we finally were able to make that happen! Get yours, before they are all gone, very limited...$41.15 -
Chromoly Interlocking Tube Clamps Need to run a structural support tube across your buggy, truggy, or cage, but still need the flexibility to pull your motor, transmission, or seats? Trail-Gear's Interlocking Tube Clamps offer the perfect balance of...$39.99 -
Lower Shock Mounts These shock mounts are designed to weld directly onto the axle housing. These mounts can be used on front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or...$39.99 -
Hi-Lift Jack Mount (Trail Gear) Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole...$39.99 -
Fan Blade (Replacement) This is a single fan blade replacement for the 2RZ/3RZ/5VZ (95-04) Dual Electric Fan. Save yourself from replacing the entire fan assembly due to a chipped or damaged fan blade. NOTE: Sold individually. If you need the fan and...$38.16 -
Evans Waterless Coolant Prep Fluid Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be...$37.75 -
Polyurethane Steering Rack Bushings Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed...$36.37
-
fast shipping
Speed Delivery