-
Weber Carburetor Tuning Manual (Haynes Techbook) Just about any Weber carb is in this book, plus Zenith Strombergs and SU carburetors, with four or five pages dedicated to each. Includes theory and...$40.11 -
Chromoly Interlocking Tube Clamps Need to run a structural support tube across your buggy, truggy, or cage, but still need the flexibility to pull your motor, transmission, or seats? Trail-Gear's...$39.99 -
Spindle Stud Kit When assembling your spindles gaskets does it feel like your all thumbs? This kit contains (16) studs and flanged nuts. With studs installed it's easier to install the spindle...$39.99 -
Track Bar Axle Mount Leaf springs can "wrap up" under the torque of rock crawling. Low gears and flexible springs are more susceptible to this effect. For most trail rigs, the wrap up does not...$39.99 -
Upper Gusset (Solid Front Axle) This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing. This product should not be used in a manner that violates...$39.99 -
Differential Stud Eliminator Kit When you come home after a trail ride, do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do...$39.99 -
Knuckle Felt Protector Kit (Rock-Ring) We have had a lot of people tell us they don't like the stock inner felt plates because they are so thin and are easily damaged in the rocks. Well check out...$39.99 -
Weld-In Frame Gusset (Web) Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel. NOTE: Sold Individually. Contact our Tech Support Line for further information at...$39.99 -
Rock Assault Front Axle Truss The Rock Assaultâ„¢ Front Axle Truss will weld onto the top of your Rock Assaultâ„¢ Front Axle Housing for extra protection against bending during competition or other...$39.99 -
Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are...$39.99 -
Hi-Lift Jack Mount (Trail Gear) Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing...$39.99 -
Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting...$39.99
-
fast shipping
Speed Delivery