NEW LCE Project 85' Sunset T-Shirt
Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for...
LC Engineering T-Shirt
(#DOITBETTER)
Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration...
LC Engineering T-Shirt
(22R)
Brand New Vintage Artwork! Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images...
LC Engineering T-Shirt
(22R / Monster 4Runner / Celica)
Brand New Vintage Artwork! Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at...
LC Engineering T-Shirt
(Monster 4Runner)
Brand New Vintage Artwork! Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174...
NEW LCE Project 85' Road Trip T-Shirt
Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for...
NEW LCE Project 85' Grille T-Shirt
Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for...
PCV Hose
This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover.
OEM Toyota Part #: 12261-35011
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only...
Breather Hose
(Front Of Valve Cover)
OEM Toyota hose comes off the valve cover and goes to intake manifold.
OEM Toyota Part #: 12262-35030
NOTE: Not for carbureted applications. For carb applications, see Part #: 1072413 (1984 only), or Part #: ...
Header Stud Set
The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Works with a stock...
Header Stud Set
Replacing your Turbo manifold? It is a good idea to replace your studs too! LC Engineering offers nothing but the best quality components around. The factory exhaust manifold studs have a shoulder in the center that can interfere with...
Rear Main Seal
High-quality silicone seals with a double lip for improved sealing. If you have a big groove worn in the crankshaft seal surface, you'll need one of our seal savers for trouble-free installation without leaks. Be sure to wipe some engine...