-
Water Bypass Hose (Bottom of Intake Manifold) OEM Toyota hose comes off the coolant hose from timing cover and runs to the bottom of intake. OEM Toyota Part #: 16261-35061 NOTE: Not for EFI applications. Contact our Tech Support Line...$19.46 -
Aluminized Heat Sheath (.75" x 3') This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks. This product should not be used in a manner that violates Federal EPA Laws...$19.41 -
Front Balancer Bolt We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. It is recommended to use Anti-seize when installing...$19.16 -
Water Block Plate (Center Of Head) If you are installing an Offenhauser intake (or if you are eliminating the heater core), there won't be room for the heater core outlet off the cylinder head. This water block plate goes in the center of the cylinder...$19.00 -
Hi-Lift Jack Rubber Isolator The Trail-Gear hi-lift jack rubber isolator is is the perfect fix for that hi-lift or hi-lift style jack you have rattling around in the back or your truck. The isolator slides onto both the jack and the jack handle keeping...$18.99 -
Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...$18.95 -
PLX Gauge Ring Mount The 2 1/16" (52mm) gauge ring mount offers the perfect mounting solution for those that do not wish to drill into their dashboard or install a gauge cluster. This 2 1/16" gauge ring mount will fit any standard sized 2 1/16" gauge...$18.76 -
Water Block Plate (Timing Cover Passenger Side) This block plate goes on the passenger side of the timing cover. Perfect for eliminating the unnecessary water hoses going around your engine compartment. Contact our Tech Support Line for...$18.72 -
Water Block Plate (Timing Cover Driver Side) This block plate goes on the driver's side back of the timing cover which is for deleting the factory heater return line on most 22's. Contact our Tech Support Line for further information at...$18.72 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.70 -
Fan/Alternator Belt (1975 - 1995) Pickup & 4Runner 20R/22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt...$18.16 -
OEM Shifter Boot (Square) Over time the factory shift lever boot can get worn out or start to break down and disintegrate. When this happens it can result in dirt or mud getting into the transmission shifter housing and then into the transmission. This...$18.13
-
fast shipping
Speed Delivery