Gaskets / Seals

Front Balancer Seal New OEM quality harmonic balancer seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pump Tank Seal Over time, your factory fuel tank seal can degrade, harden, or crack from constant exposure to fuel and environmental elements. This can lead to dangerous fuel leaks, strong gasoline odors, and persistent EVAP system check engine...

Fuel Pump Lock Ring Seal If you are replacing your fuel pump, now is the perfect time to replace the lock ring seal as well. Over time, the factory seal can degrade, swell, or crack, leading to dangerous fuel leaks, vapor loss, and EVAP system check...

LCE EGR Crossover Gasket This premium LCE replacement gasket is designed for the EGR Crossover plate located on the back side of the cylinder head. If you want to remove the EGR crossover entirely, please see part #: 10320007 for the 20R/22R/RE/RET EGR...

Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 1989 to 1995 Toyota 22RE throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Water Pump Gasket Prevent coolant leaks and protect your cooling system with a high-quality LC Engineering Water Pump Gasket. Engineered to deliver a tight, reliable seal between the water pump and engine block, this gasket ensures proper coolant...

Heater Tube O-Ring (Under EFI Manifold) The O-ring seals the heater tube under the EFI intake manifold. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. This is OEM toyota part and may not...

OE Plenum Gasket This is a OE replacement 3VZ plenum gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please...

PCV Grommet New PCV grommet for valve cover on 20R, 22R, and 22RE engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Throttle Body Gasket Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is a stock replacement...

Rear Main Seal Housing Gasket This gasket seals the rear main seal housing to the block on 20R-22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Distributor Shaft O-Ring O-ring that seals the distributor shaft to the cylinder head. Keeps oil from leaking out and debris from getting in and contaminating the oil system. Contact our Tech Support Line for further information at 928-575-2174...