Mechanical Fuel Pump
The fuel pump is a very important part of your vehicle. If you do not have the proper fuel pressure or volume you can starve the engine and cause major engine damage. The best way to cure this problem is to replace that worn-out fuel pump with a new one. LC Engineering can provide you with a fuel pump for your carbureted 22R engine. This is a direct replacement mechanical pump that will bolt to the cylinder head.
If your engine already has a mechanical fuel pump installed, you will already have this spacer installed. If you are not sure if you have this spacer, check between the fuel pump and the cylinder head. It will be a spacer roughly 1/4" thick. If you are converting a formerly-fuel injected vehicle to carburetion, you will need to purchase a fuel pump drive spacer, see Part #: 1035052.
NOTE: Comes with (2) gaskets but no spacer, which is sold separately on our store (link above). Failure to use the fuel pump spacer will result in fuel pump failure!
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.