Stage 2 Mini Valve Train Kit - 2RZ/3RZ
Includes: Stainless Steel Valves, Dual Valve Springs, Spring Seats, Titanium Retainers, Hardened Keepers & Viton Valve Seals
LC Engineering has taken the guess work out of your 2RZ/3RZ valve train. These valve train kits will supply you with all the compatible parts to upgrade the valve train on your performance engine. The Stage 2 Mini kit includes our stainless steel valves(+1mm), Pro dual valve springs, spring seats, titanium retainers, hardened keepers and Viton valve seals. This kit will work with stock cams or our Stage 1 camshafts.
Intake & Exhaust Valves
These valves are 1mm larger than stock (Intake 38.5mm / Exhaust 31.5mm) and work great for ported street heads that don't need the huge oversized valves. These stainless steel valves are lighter than the stock steel valves, and have a special anti-friction coating to promote better airflow across the valve as well as reduced resistance in the guide, resulting in better valve train stability. These valves will work with the stock seats once a performance valve job has been performed.
Pro Dual Valve Springs
The Pro Dual Valve Springs give you 75lbs of seat pressure at a 1.400" install height and open pressure of 215lbs (at .450" lift) they will work perfectly with any naturally aspirated or low boost application (0-20 lbs of boost). These springs are rated up to 8,000 RPM and will accommodate cam lifts up to .455".
These spring seats will sit on top of your stock spring seat and allow you to run our dual valve springs without having to modify your head.
LCE Titanium retainers are lighter and stronger than steel. Additionally, our Titanium design gives you confidence; no longer will you be worried about splitting a retainer and tearing up an engine when turning over 8,000 RPM. Titanium retainers are American made from space age material. Titanium is less than half the weight and ten times stronger than the factory steel retainer, these Titanium retainers allow you to use high lift cams without the chance of failure. From a standing idle to the most extreme rpm, our Titanium retainers perform flawlessly, without compromise.
Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium Retainers. A must for high rpm applications!
Viton Valve Seals
Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil leakage past the seal. They insure a perfect seal for maximum performance and long engine life.
Contact our Tech support line for further information: 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Newsletters! Or try our new web site LCEPerformance
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.