-
Quick Release Hinged Aluminum Bracket This quick release bracket is hinged for ease of use and are designed to securely hold your bottle at the proper angle for maximum flow through the siphon tube. Contact our Tech Support Line for further...$225.52 -
Toggle Activation Switch (Covered) This covered toggle switch enables performance enthusiasts to activate solenoids, fuel pumps, etc. This switch keeps you from accidentally blasting Nitrous into the engine before you are ready. Contact our Tech...$43.89 -
Push-Button Activation Switch (Momentary) This heavy duty push button (momentary) switch enables performance enthusiasts to activate solenoids, fuel pumps and most anything else. Contact our Tech Support Line for further information at...$30.89 -
Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...$24.57 -
Remote Push-Button Activation Switch (Water Resistant) The remote push button switch (water resistant) enables enthusiasts to activate solenoids, fuel pumps, and most anything else, while safely protecting the switch from water damage. Contact...$93.72 -
Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...$82.29 -
Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...$70.27 -
10 oz. Standard Bottle Bracket NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating. Contact our Tech...$101.03 -
Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...$82.35 -
Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...$7.17 -
Recessed 10mm Allen Socket (3/8" Drive) This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs, see Part #'s: 2053160 and 2053162. This product should not be used in a manner that violates...$13.81 -
Tan Exhaust Wrap Kit (2" x 50') The first step in controlling underhood temperatures is to keep heat in the exhaust and evacuate it out of the engine compartment. DEI’s Exhaust Wrap will reduce under hood temperatures by up to 50%, while...$135.18
-
fast shipping
Speed Delivery