-
Thermostat Housing Adapter Kit (Late style Water Neck) Most aftermarket intake manifolds on the market today use the early style water neck also known as thermostat housing. This particular style of water neck is no longer available from Toyota. LC...$32.08 -
Flip Socket (19mm / 21mm) For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard sockets. Especially handy for custom wheels with tight...$30.97 -
Push-Button Activation Switch (Momentary) This heavy duty push button (momentary) switch enables performance enthusiasts to activate solenoids, fuel pumps and most anything else. Contact our Tech Support Line for further information at...$30.89 -
Garret T3 Exhaust Discharge Flange (5 Bolt) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. This 5-bolt flange fits standard 5-bolt T3/T4 turbo exhaust housings, including the turbos...$30.85 -
J-Bend 409 Stainless Steel / .065 Wall (Choose Your Size) LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is suitable for normally aspirated header applications and...$30.85 -
Green Electric Fan Switch (Illuminated) Flex-a-lite auxiliary illuminated single throw rocker switch provides cockpit control or override of fan function. This switch may be wired to actuate a fan, regardless of temperature settings, and you also can...$30.31 -
LC Engineering Classic Flexfit Hat (Modern Flag) Show your support at the races or while you're out rock crawling with an LC Engineering hat! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$29.23 -
Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...$28.23 -
Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...$27.04 -
Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...$26.99 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$25.70
-
fast shipping
Speed Delivery