K&N PCV Breather
(62-1015)
Not Recommended For Any Street Vehicle
K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1015 crankcase vent filter has a K&N embossed chrome-plated steel top with a chrome-plated steel base. The 1/2 inch diameter zinc tube is designed to push in and clamp directly onto metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Filters can be pressed into rubber grommets in valve covers for direct mounting. When using dual carburetors or performance type single carburetors, this Crankcase Breather should be installed in place of the PCV valve located at the back of the valve cover. Designed for race or boosted applications only.
Features:
- 1/2 inch zinc tube
- Chrome-plated steel top and rubber base
- Mounts directly into rubber grommets in valve covers
- Washable and reusable filter media
Specifications:
- Vent Outside Diameter: 0.5 in (13 mm)
- Outside Diameter: 2 in (51 mm)
- Height: 1.5 in (38 mm)
- Top Style: Metal
- Filter Material: Non-woven Synthetic
- Top Material: Chrome
- Product Style: Steel Base Crankcase Vent Filters
- Flange Length: 0.875 in (22 mm)
- Flange Type: Centered
- Flanges: 1
- Weight: 0.2 lb (0.1 kg)
- Product Box Height: 6.1 in (155 mm)
- Product Box Length: 4.1 in (104 mm)
- Product Box Width: 2.13 in (54 mm)
- Inner Wire: No
NOTE: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle. The New K&N Filters will not come with oil like the good old days.
This removes the PCV valve which is used to remove carbon from the crankcase, which keeps your oil cleaner. If running this filter, you will need to change your oil every 300-500 miles. If your vehicle is STREET DRIVEN at all, we recommend retaining the PCV Valve System.
This product should not be used in a manner that violates Federal EPA Laws.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
by Turn 14
- 1975-1980 20R 2.2L Engines
- 1981-1995 22R 2.4L Engines
- 1983-1995 22RE 2.4L Engines
- 1985-1987 22RET 2.4L Engines
- 1995.5-2004 2RZ 2.4L Engines
- 1995.5-2004 3RZ 2.7L Engines
45 Reviews Hide Reviews Show Reviews
-
Super easy install!
Just out a PCV elbow and a clamp on top of the existing PCV valve and clamped the filter on. Capped off the hose inlet on the carb, runs great and looks cleaner.
-
Loved it
As always lce knows how to get my Toyota running great.
-
valve cover clean up
The breather fits great, looks great.
-
K&N Breather-20R/22R/RE/RET/2RZ/3RZ-Eliminates P
Fit perfectly. Looks great !
-
K&N Breather Replaces PCV
K&N Breather fit perfectly snug into the new rubber grommet. My truck is running even better with these new K&N Valve Cover Breathers !
-
K&N breather
good quality part & snug fit into the existing pcv rubber grommet.
-
good product
I wish it had a new grommet for the valve cover but other then that good product and fast shipping
-
pcv filter
Fit and finish of the item is top notch Helped clean up valve cover
-
K&N Breather-20R/22R/RE/RET/2RZ/3RZ-Eliminates PCV
5 star, These small filters for the valve cover fit well and come with the proper oil for the elements.The larger more expensive air cleaner above does not come with a gasket or oil, go figure!