• Panhard Link Tubing (Front 3-Link) This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. This product should not be...
    $99.99
  • Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...
    $99.99
  • Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assaultâ„¢ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Threeâ„¢ Front 3-Link Kit with your new Rock Assaultâ„¢ Front Axle Housing. If you are ordering the Trail-Link...
    $99.99
  • Steering Pump Kit Hoses This kit contains one high pressure and three low pressure power steering lines. These lines are used to connect the pump, steering box and cooler together. The two hoses that go from the steering ram to the steering box are not...
    $99.99
  • Taper Reamer This is the perfect taper reamer for reaming out Toyota and Suzuki pitman arms for the larger, more commonly used FJ80 tie rod ends, like the ones offered in our popular high steer kits. Our taper reamer is 1:10 (1" of taper for every 10"...
    $99.99
  • Clevis End Kit Our Clevis End Kit is the most complete and affordable kit on the market. All hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most...
    $99.99
  • Front 3-Link Lower Link Axle Bracket (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...
    $99.99
    choose option
  • Water Outlet Pipe (OEM Heater) Don’t get stuck with an overheated engine due to a failed Heater Outlet Pipe. The solid metal construction of this OEM Toyota pipe will keep you going for another 20+ years! This is for the exhaust side, for heater...
    $99.93
  • OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...
    $99.76
  • Pro Air Fuel Tuning Module (Mixture Meter) The Pro Tuning Module gives you the ability to adjust the fuel curve in your 22RE. If your Air Fuel Ratio shows lean, turn the tuning module to a richer setting, it's just that simple. Contact our Tech...
    $99.25

LCE Performance is a trusted supplier of 1989-1995 Toyota pickup parts. Recognizing the unique characteristics of these trucks, LCE Performance offers a diverse range of components to enhance both the performance and aesthetic appeal of these vehicles.


Enthusiasts seeking engine upgrades for their 1989-1995 Toyota pickups can turn to LCE Performance for high-performance camshafts, cylinder heads, and exhaust systems. The company's selection of carburetor kits ensures optimal air and fuel delivery, contributing to improved power and efficiency for these iconic trucks.


LCE Performance also addresses suspension needs with lift kits and shocks, providing owners the opportunity to customize their trucks for off-road adventures or achieve a unique stance. Drivetrain components, including clutches and differentials, are available for those looking to fine-tune the performance of their vehicles for specific driving conditions.


With a commitment to quality and precision engineering, LCE Performance remains a go-to source for enthusiasts seeking to restore, modify, or upgrade their 1989-1995 Toyota pickups. By offering a comprehensive range of aftermarket solutions, the company ensures that these classic trucks continue to meet the evolving expectations of performance and reliabilit