-
Leaf Spring Frame Tube Jigs Frame Tubes install into IFS style frame for mounting leaf springs. Accepts stock Toyota front bushings. Jigs are used for positioning tubes in frame. This product should not be used in a manner that violates Federal EPA...$29.99 -
Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...$29.99 -
Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...$29.99 -
Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...$29.99 -
Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...$29.99 -
Trail Safe Inner Axle Seals Figure (A): Deflection gaps in the Brand X seal are the result of the spring clip opening. Fluid is allowed to bypass the seal lip through these deflection gaps. The result is a leak. Figure (B): The Trail Safe seal lip is...$29.99 -
Glowshift Single Gauge A-Pillar Pod GlowShift's Universal Single A-pillar Pod is a single gauge pod that is designed to be installed on virtually any vehicle and will house (1) 2 1/16" (52mm) gauge. Each universal single gauge pod is crafted from...$29.99 -
Front Strut Rod Bushings With the increased use of higher traction and performance tires on today's vehicles, soft original factory rubber bushings can very often cause the steering axis slant (caster alignment) to excessively and adversely change...$29.94 -
Radiator Outlet Hose LC Engineering is now offering an OEM radiator outlet hose. OEM Toyota Part #: 16572-35060 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...$29.81 -
Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our Tech Support Line for further information at...$29.75 -
LC Engineering Large Decal (26" X 8") Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further information at...$29.11 -
Exhaust Gasket Almost the same as the OEM 1985 to 1995 22R or RE. The turbo exhaust manifolds use a different stud pattern. NOTE: This will only work w/ the stock style bottom mount turbo manifolds. If you have our top mount turbo manifold, you will...$28.64
-
fast shipping
Speed Delivery