-
2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air...$62.10 -
2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air...$61.79 -
2" Turbo J-Bend / Intercooler (Mild Steel) LC Engineering has all the intercooler pieces to finish off that turbo project. LC Engineering can build a custom intercooler no matter what your needs...$51.45 -
GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174.$40.86 -
Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate...$36.09 -
GenV CompGate40 | Inner Wastegate Spring Fine-tune your boost levels with genuine inner replacement springs engineered specifically for Turbosmart GenV CompGate40 external wastegates. Allowing for...$33.94 -
2.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality...$30.85 -
3.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality...$30.58 -
2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality...$27.26 -
Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves...$26.98 -
Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in...$26.17 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5"...$24.84
-
fast shipping
Speed Delivery