-
Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory...$34.03 -
Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our...$30.64 -
Hall Sensor Mount When installing our LC Pro Fuel Injection System on a 2RZ or 3RZ, this bracket mounts the Hall Effect Sensor perfectly to generate a signal from the crank pulley. Contact...$28.36 -
Street Distributor Cap New OEM style replacement distributor cap. A must when changing spark plug wires. Distributor caps can develop carbon tracks that can wreak havoc on the electrical path...$22.24 -
Denso Iridium IK24 Spark Plug These 3 step colder plugs are recommended by URD if you are running the 7th Injector and 2.1 pulley upgrade on a Supercharged 5VZ engine. If you are running the stock...$14.05 -
Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or...$12.36 -
(1) NGK V-Power Spark Plug LFR7AIX2309 (1 Heat Range Cooler than Stock) NGK iridium plugs represent the ultimate evolution of spark plug technology and performance. The iridium center electrode is...$11.85 -
Plug Wire Separator Kit Pro Wires (8.5mm) - Black These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed...$11.31 -
Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to...$10.88 -
Street Distributor Rotor Replacement distributor rotor for (95-98) Toyota Tacoma trucks. The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to...$10.30 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support...$9.85 -
Denso Iridium IK22 Spark Plug These 2 step colder plugs are recommended by URD if you are running the 7th Injector upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low...$9.68
-
fast shipping
Speed Delivery