Pro Flow Exhaust System
LC Engineering’s Pro Flow Exhaust Systems are made with 409 stainless steel tubing, a 409 stainless steel straight-through Street Max muffler and 3/8" thick mild steel flanges. The straight-through design of the Street Max muffler delivers a deep performance tone without the excessive interior drone or high-pitched external sound frequencies (rasp) while providing optimal flow for improved horsepower & torque. They are then ceramic coated for long-lasting good looks and protection from the elements. LC Engineering designs our kits to be a direct fit application that requires little or no modifications and uses factory exhaust hanger locations. This bolts up behind your factory catalytic converter or one of our high flow performance catalytic converters. This exhaust system features 2 1/4" tubing with a 3" polished stainless tip. Every kit is shipped complete with all the instructions and hardware you will need for a quick and easy installation process.
Features:
- Straight-Through Design
- 409-Grade 16 -Gauge Stainless Steel Construction
- Delivers A Deep Performance Tone
- High-Heat Thermal Mesh
- Improved Horsepower & Torque
- Effective Drone Reduction
- 3 Year Limited Warranty (Muffler)
NOTE: LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims. Will not fit 4 Runners, no company makes a cat back system for 1st Gen 4 Runners. You will need to have any exhaust shop build something directly to the vehicle.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
Will this fit my 4Runner? No.
If you have a 1990-1995 Model 4Runner we offer yours here .
If you have a 2010-2015 Model 4Runner we offer yours here .
- 1985-1995 22R 2.4L Pickup Engines (4x4 & 4x2)
- 1985-1995 22RE 2.4L Pickup Engines (4x4 & 4x2)
- 1985-1988 22RET 2.4L Pickup Engines (4x4 & 4x2)
- 1988-1995 3VZ 3.0L Pickup Engines (4x4 & 4x2)
To open a printable PDF version of this instruction CLICK HERE
LC Engineering has designed our Pro Flow Exhaust to fit any 1985-1995 22R/RE or 3VZ truck. It comes with a front pipe that is designed to be trimmed to the correct length for your cab/bed length. Please read and follow the directions completely to ensure proper fitment.
NOTE: Will Not Fit Any 4Runner.
Installation:
-
1. Remove the stock exhaust system from the catalytic converter on back. Be carefully not to damage the hangers or brackets.
2. Install the "˜S' pipe into the muffler and place the muffler in the stock hangers. Install the clamp snug, do not tighten firmly.
3. Attach the tailpipe section using a 2-bolt flange gasket. Bolt to the muffler and attach rear hanger. Do not tighten yet.
4. Check alignment and location of muffler and tailpipe. Hangers may require a slight adjustment for proper alignment.
5. The front pipe section may need to be cut to length. Be sure to allow enough overlap for adequate clamping area. Install the front pipe section using a 2-bolt flange gaskets. If you have to cut the front section of pipe, make sure it's cut clean (no burs) and cut straight.
6. Check the clearance of your Pro Flow Exhaust System to the floor pan, chassis components, parking brake cable assembly, driveshaft, etc. Adjust system as needed.
7. Starting at the muffler, tighten bolts working towards the front and back, then firmly tighten the 2 ¼" exhaust clamps.
8. Start engine and check for exhaust leaks. Tighten flanges and clamps evenly as needed.
NOTE: This system is designed to fit all cab and bed configurations. FRONT PIPE SECTION WILL HAVE TO BE CUT to correct length shorter applications. LC Engineering recommends using O2 safe, high-temperature silicon on slip connections for small exhaust leaks.
114 Reviews Hide Reviews Show Reviews
-
great
your products are top of the line and look great. I cant wait to install it.
-
worth every dime
fuckin love it
-
.
.
-
.
.
-
.
Great sound and performance, very easy install.
-
Nearly 3 Years Strong, Still Satisfied!
Purchased and installed in 12/2016 for my '94 XtraCab 4x4 22RE 5 speed. Replaced cat with a flex pipe with flanges welded on to be a bolt-on affair if I ever remove it. Absolutely love the sound of it since it's a great tone that is quiet when you're cruising, but not too loud or too quiet when giving it some throttle. I've received only compliments on the way it sounds. Ran it for 2 years on the stock header, then installed a Doug Thorley header and was delighted to hear that the exhaust note didn't change. This LCE Pro Flow exhaust has been on there for just under 3 years of daily driving (in an area with no snow/salt) with plenty of wheeling off-road and it's holding up great. Some visual signs of small leakage at the slip joints, but I coated the inner bore with high temp copper RTV during install before tightening the crap out of the included clamps, and I don't hear anything so I'm not going to bother it. 5/5 Would buy again if/when I get another 22RE pickup/4Runner!
-
.
Fit great
-
Magna Flow exhaust
Looks good, sounds great.
-
.
.