Pro Flow Exhaust System
LC Engineering’s Pro Flow Exhaust Systems are made with 409 stainless steel tubing, a 409 stainless steel straight-through Street Max muffler and 3/8" thick mild steel flanges. The straight-through design of the Street Max muffler delivers a deep performance tone without the excessive interior drone or high-pitched external sound frequencies (rasp) while providing optimal flow for improved horsepower & torque. They are then ceramic coated for long-lasting good looks and protection from the elements. LC Engineering designs our kits to be a direct fit application that requires little or no modifications and uses factory exhaust hanger locations. This bolts up behind your factory catalytic converter or one of our high flow performance catalytic converters. This exhaust system features 2 1/4" tubing with a 3" polished stainless tip. Every kit is shipped complete with all the instructions and hardware you will need for a quick and easy installation process.
Features:
- Straight-Through Design
- 409-Grade 16 -Gauge Stainless Steel Construction
- Delivers A Deep Performance Tone
- High-Heat Thermal Mesh
- Improved Horsepower & Torque
- Effective Drone Reduction
- 3 Year Limited Warranty (Muffler)
NOTE: LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims. Will not fit 4 Runners, no company makes a cat back system for 1st Gen 4 Runners. You will need to have any exhaust shop build something directly to the vehicle.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
Will this fit my 4Runner? No.
If you have a 1990-1995 Model 4Runner we offer yours here .
If you have a 2010-2015 Model 4Runner we offer yours here .
- 1985-1995 22R 2.4L Pickup Engines (4x4 & 4x2)
- 1985-1995 22RE 2.4L Pickup Engines (4x4 & 4x2)
- 1985-1988 22RET 2.4L Pickup Engines (4x4 & 4x2)
- 1988-1995 3VZ 3.0L Pickup Engines (4x4 & 4x2)
To open a printable PDF version of this instruction CLICK HERE
LC Engineering has designed our Pro Flow Exhaust to fit any 1985-1995 22R/RE or 3VZ truck. It comes with a front pipe that is designed to be trimmed to the correct length for your cab/bed length. Please read and follow the directions completely to ensure proper fitment.
NOTE: Will Not Fit Any 4Runner.
Installation:
-
1. Remove the stock exhaust system from the catalytic converter on back. Be carefully not to damage the hangers or brackets.
2. Install the "˜S' pipe into the muffler and place the muffler in the stock hangers. Install the clamp snug, do not tighten firmly.
3. Attach the tailpipe section using a 2-bolt flange gasket. Bolt to the muffler and attach rear hanger. Do not tighten yet.
4. Check alignment and location of muffler and tailpipe. Hangers may require a slight adjustment for proper alignment.
5. The front pipe section may need to be cut to length. Be sure to allow enough overlap for adequate clamping area. Install the front pipe section using a 2-bolt flange gaskets. If you have to cut the front section of pipe, make sure it's cut clean (no burs) and cut straight.
6. Check the clearance of your Pro Flow Exhaust System to the floor pan, chassis components, parking brake cable assembly, driveshaft, etc. Adjust system as needed.
7. Starting at the muffler, tighten bolts working towards the front and back, then firmly tighten the 2 ¼" exhaust clamps.
8. Start engine and check for exhaust leaks. Tighten flanges and clamps evenly as needed.
NOTE: This system is designed to fit all cab and bed configurations. FRONT PIPE SECTION WILL HAVE TO BE CUT to correct length shorter applications. LC Engineering recommends using O2 safe, high-temperature silicon on slip connections for small exhaust leaks.
114 Reviews Hide Reviews Show Reviews
-
Pro flow exhaust
Awesome service I asked for a small section of exhaust pipe to help with installation and you actually listened and put it in with my order.Those are the things that keep customers and get great referrals to future ones.
-
.
.
-
Fantastic!
This is such a great product! The shipment was incredibly fast only took a day after the holiday. Great craftsmanship and makes my truck sound a lot better...makes it run a lot smoother too. Thanks LCEngineering!
-
Work of art
The whole system really is beautiful and super clean. I expect a log service life and a bit more torque paired up with the header and cam I have waiting. Thanks LCE for solid components that keep our old rigs rolling!
-
nice system
The exhaust system is very nice with quality welding and all the gaskets and bolts needed to install it. The hangars on the muffler are a little long on mine and they had to be bent up a little to keep it from making contact with the tail pipe. If you're running your stock exhaust with catalytic converter you will bolt right up. But, I am restoring my 1986 turbo charged extra cab pickup. Converted it over to the CT20 upgrade turbo kit. The pipe is shorter than stock length. So you may have to pick up their 4WD connector pipe p/n 1041006 like i did and make the difference up. Everything is high quality and when i ran into my problem, the CHAT button is your like to your friends. They helped me get what i needed.
-
Good job
Parts arrived fast, well packed and in good condition. Attention to detail is evident throughout the packing and shipping process. Also, the parts fit right the first time, which saves me (installer) a lot of time and frustration! NK
-
.
.
-
Great product awesome fit, easy install.
Everything went as planned. And it sounds really sweet.
-
Pro flow
Great fit and finish. Excellent quality. Great customer service. OLD MAN..lol