22RE TPS Allen Bolt Upgrade Kit

22RE TPS Allen Bolt Upgrade Kit

One challenge to adjusting the 22re TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC Engineering offers a TPS bolt upgrade kit to replace the stock TPS Phillips head screws with allen head bolts and then uses a ball-end allen wrench to loosen and tighten them. The ball headed allen wrench allows you to access the bolts at an angle instead of having to get to them straight on like the stock screws.

This kit will also help if you have damaged the stock screw heads trying to loosen them up. This kit contains two M4-0.7 x 16mm socket head bolts, four M4 flat washers and one 3mm ball head allen wrench. The screw length changed around on the stock applications so we supply you with screws to match the longest stock application and then you can use the supplied washers to shim them as needed for proper length.

To open a printable PDF version of this instruction CLICK HERE

Installation:

This TPS bolt upgrade kit comes with (2) Allen Head Screws, (4) Washers and a Ball Head Allen Wrench. This Kit was designed to replace the stock Phillips Head Screws with Allen Head Screws. The stock screw length varies slightly from year to year so we supply you with the longest stock length screw. You can use the supplied washers to shim the new bolts as needed. Make sure that you adjust your throttle position sensor after installing these new bolts.