Upgrade your exhaust system with the 2 1/4" Pro Flow Performance Muffler—a direct replacement for power and sound enhancement. This is the same MagnaFlow muffler featured in all LC Engineering Pro Flow Exhaust Systems, renowned for their durability...
Tie Rod Kit
Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based on our testing and experience with kits like these, we know that the failure point is always in the tie rod ends, which is why Trail-Gear...
Spindle Hub Stud Kit
(ARP 2000)
With 30 spline birfields, six stud knuckles, and chromo hub gears or drive flanges, the next weak link in your front axle is your hub studs. When they fail you will be left without four wheel drive, and oftentimes the...
OEM Transmission Mount
(Automatic)
Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some...
Wheel Spacers
(6 on 5.5")
These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle...
Pro Comp Rear Shocks
(PRO-X Twin Tube Shock Absorber)
The Pro Comp PRO-X Twin Tube Shocks offer good damping performance and are intended for vehicles that see a lot of paved roads with the occasional off-road adventure. They feature a high-quality...
Complete Gasket Set
Head gasket failure is one of the most common problems with the Toyota four-cylinder engines. With a cast iron block and an aluminum cylinder head, add a little heat, and you have two entirely different metals expanding and...
Exhaust Wrap Kit | 2" x 50' | Tan
Managing under-hood temperatures starts with keeping radiant exhaust heat trapped inside your headers and safely evacuating it out of the engine compartment. This premium Exhaust Wrap by DEI reduces under-hood...
Toytec 1.5" Block & U-Bolts
Kit Includes:
Solid T6 Aluminum blocks with pressed in steel pin.
Includes new u bolts w/hardware, and two blocks.
1.5" lift block kit works with add-a-leafs and/or shackles for an additional 1.5″ of rear lift.
Fits...
Wheel Bearing & Seal Kit
(Front)
LC Engineering understands the importance of having all the parts needed for the job. With that being said we made a kit, so when you change the wheel bearings, you have all the necessary gaskets and seals as well...
OEM Throttle Position Sensor
Throttle position sensors are switches on the throttle body that keep the engine control computer informed about the throttle opening. The TPS is a variable resistor that changes resistance as the throttle opens wider. The...