• LC Engineering | Monster 4Runner T-Shirt Show off your off-road pride with the LC Engineering Monster 4Runner T-Shirt! Featuring all-new vintage-inspired artwork, this classic tee is perfect for...
    $10.00
    choose option
  • Individual Hub Stud Replacement Kit When you only need to replace a single broken or stripped fastener, there is no need to purchase an entire set. LC Engineering offers these individual hub stud...
    $9.99
  • Flange Dust Shield Dust shield for use with our triple drilled flange, see Part #: 2053174. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech...
    $9.99
  • Transfer Case Dust Flange Dust shield for use with triple drilled output flange. Keeps rocks and other trail debris from damaging seals behind the output flange on your transfer case. This...
    $9.99
  • Light Bar Tabs (Weld-On) Weld-On Light Tabs are CNC formed from 1/8" thick 1010 steel, coped for 1 1/2" or 1 3/4" O.D. tubing, and have a 1/2" sized bolt hole. These tabs also make great generic...
    $9.99
  • Inner Axle Seal When you swap out a Birfield joint it's a good idea to change the inner axle seal at the same time to keep the knuckles clean of weeping oil. This is a great part to keep in your...
    $9.99
  • Power Steering Reservoir Bracket This Rock Assault Reservoir Bracket bolts right to the back of our Rock Assault Reservoir and allows you to either weld the other side of the bracket to your cage...
    $9.99
  • Reservoir Filter Bracket Our Rock Assault Reservoir Filter Bracket bolts right to the back of our Rock Assault Reservoir Filter Kit (into the pre-tapped holes) and allows you to either weld the...
    $9.99

The first-generation Toyota 4Runner (1984–1989) is the original factory 4Runner and shares its chassis, engines, and most of its drivetrain with the contemporary 4th gen Toyota Pickup. The engine lineup is the LCE specialty zone: the carbureted 22R 2.4-liter (1984-1987), the fuel-injected 22RE (1985-1989), the factory-turbocharged 22RTE that ran from 1986 through 1988 in very low volume, and the 3VZE 3.0-liter V6 introduced for 1988. The 1984-1985 trucks ran a solid front axle; 1986 onward got the IFS (Independent Front Suspension) revision shared with the Pickup.

LC Engineering has been building performance and replacement parts for the 22R, 22RE, 22RTE, and 3VZE since 1985 — the entire production life of the 1st gen 4Runner and longer than most owners have had their trucks. Our 1st gen 4Runner catalog includes complete long blocks and crate engines, the LCE Stroker (2.7-liter displacement increase), Stage 2 through Stage 5 camshafts, header kits, supercharger and turbo kits, master rebuild kits, suspension components for both the solid-axle and IFS trucks, and the OEM-spec replacement parts that keep these 35+ year old 4Runners on the road.

Browse 1st gen 4Runner parts above by system, or use these starting points: