OEM Balancer Bolt We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. The bolt size is m16 x 1.50. It is recommended to use...

Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Oil Pan Hardware Kit (Silicone Seal) This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with silicone seal pans only. This kit will not work with gasket...

h1 class="pdhead"Oil Pan Hardware Kit/h1 h2 class="pdhead"(Gasket Seal)/h2 p This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with gasket seal pans only...

Flexplate Bolt Kit (OEM) Connect that flexplate with confidence. These OEM flexplate bolts are just what the doctor ordered to connect your flexplate to your engine. They have a black oxide finish to help resist rust and corrosion. Recommended to be...

Hardware Kit (Exhaust Flange) Exhaust hardware kit used on the two-bolt collectors in the header and exhaust kits. Kit Includes: (4) Mechanical locking nuts (M10 x 1.25mm) (4) Flange Bolts (M10 x 1.25mm x 40mm grade 10.9) NOTE: All hardware is...

CT-20 Turbo Stud Kit This stud kit was made to attach the CT-20 Turbo to the stock turbo manifold on your Toyota 22R-TE. If you find yourself needing to take apart a 20+ year old turbo setup, it is likely your old studs will be damaged or worn out. Why...

OEM Main Bolt (Cam Bolt) This is a brand new OEM Toyota main bolt. Ironically this is the same bolt used to hold the cam gear and distributor drive gear onto the front of the cam. Quantity 10 used for crank main caps.OEM Part #:...

Oil Drain Plug (Small) The LCE 20R/22R small oil drain plug is manufactured from high-quality materials to handle the most challenging conditions. LCE drain plugs and gaskets are the quality parts you need to do your job right. The head is 14mm, and...

Caliper Bolt This bolt is the perfect replacement to bolt your caliper to the spindle. After years of service, these bolts can end up stripped or damaged. This is just one of the many parts we carry for brake hardware. Contact our Tech Support...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Oil Drain Plug (14mm X 1.50 Replacement Aftermarket Pan) This LCE 20R/22R replacement oil drain plug is used for some aftermarket oil pans. Specifications 17mm Head N14-1.50 Thread Pitch NOTE: Gasket is not included, see Part #: 1013116 for...