Toyota Knuckle Rebuild Kit
(w/o Wheel Bearings)
Some people prefer knuckle rebuild kits with brand name Japanese "Koyo" trunnion bearings. Other than the brand of the bearings, the only difference in this kit is that the outer felt rings are not...
Chromoly Pitman Arm
Available in a 3/4" less than stock drop and flat versions. Tapered for either a Toyota FJ-80 TRE. or Chevy 1 Ton ends.Pitman arms fit either Toyota Hilux IFS steering box or FJ-60 Land cruiser box.We offer the GM tie rod ( 2010 R-L )...
Power Steering Fluid Cooler
If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing an oil cooler in front of the...
OE Idler Arm IFS
Time for replacing Idler Arm? LC Engineering offers the best option available in the market. We all know that if one of your suspension-steering components is not working properly, it will eventually affect your tire alignment or it...
Flat Pitman Arm
Solid one piece design. Features FJ80 tapered hole. Extra strong and wide, one piece, forged design. Ideal for use with crossover steering. Your choice of flat arm or drop arm. The flat arm has no drop. The drop arm has same...
Stock Drop Pitman Arm
This Stock Drop Pitman Arm is a solid one piece, forged design, and features a FJ80 tapered hole. For use with crossover steering and features the same drop as the factory pitman arm.
This product should not be used in a manner...
Trail Safe Knuckle Ball Wiper Seal
Tired of wiping big clumps of dirty sandy grease off of your knuckle balls after every trip? So are we. We asked our engineering department to look at the problems with the OEM design along with what was currently...
Lower Knuckle Caps
(Solid Axle)
These stock replacement caps fit on the bottom of 79-85 Toyota solid axle knuckles.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information...
Crossover Steering Drag Link
(You Choose Size)
These heavy duty drag links are made from 1.25" x .250" wall DOM tubing. Precision tapped. Left side thread mark. Powder coat black finish. When installing a Rock Assault Front Axle Housing and using a hi...
Tie Rod
(Choose Your Length)
Trail Gear's heavy duty tie rods are made from 1.25" x .250" wall DOM tubing, precision tapped with a left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish...
Steering Columns
3 1/4 Inches: This steering column will allow you to use your existing Toyota steering linkage without having to buy a coupler and then cut and weld on your steering shaft. This steering column measures 3 1/4 inches from the base of...