Plug Wire Separator Kit
(8.5mm Pro Wires)
These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...
Pro Distributor Rotor
The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...
Crank Trigger Magnet
Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system.
NOTE: Sold...
Air Temp Plate
(Adapts Cold Start Injector to Air Temp Sensor)
Custom made plate to install an air temperature sensor where the cold start injector normally sits.
Contact our Tech Support Line for further information at 928-575-2174...
OEM Distributor Cap O-Ring
This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap.
Contact our Tech Support Line for further information at...
NGK Spark Plug R5672A-8
(10-18 Psi / 14:1 Comp)
LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...
NGK Spark Plug R5671A-10
(30+ psi of Boost)
NGK's V-grooved center electrode moves the spark to the outer edge of the electrode for improved ignitability in all combustion chamber conditions. This configuration is especially helpful for throttle...
Street Distributor Rotor
The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...
NGK Spark Plug R5671A-9
(18-30 Psi / 14:1+ Comp)
LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...
Street Distributor Rotor
The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of the rotor, from which the high tension spark jumps to each of the...
Spark Plug Wire Clip
This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...
NGK Spark Plug BKR5EGP
(G-POWER PLATINUM)
LC Engineering carries NGK G-Power Platinum spark plugs, they are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel...