Silicone Adapter (2.5“ I.D. to 2.75″ I.D.) Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...

Silicone Adapter (2.5 “ I.D. to 3.0″ I.D.) Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

Fuel Pressure Bolt Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel bolt kit is the solution to the problem. This kit will replace the banjo bolt on the cold start...

Intake Manifold Stud Kit This kit comes with all new studs to mount your EFI manifold to your cylinder head. This kit also comes with a new long allen bolt to replace to old bolt that goes through the thermostat housing to the head. Replacing your...

Silicone Vacuum Hose (3mm / 6mm / 8mm / 10mm ) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

Union Bolt (Fuel Rail) LC Engineering offers this M14 x 1.25 replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails. Contact our Tech Support Line for further information...

Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 1989 to 1995 Toyota 22RE throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Air Intake Tube Clamp Need to connect the air intake duct and secure it properly? Simply get these clamps into place, and snug it down. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

Fuel Union / Banjo Bolts This fitting will be used on both sides of the 22re fuel filter. OEM Toyota Part #: 90401-12097 NOTE: The threads of these fittings are metric M12 x 1.25. Contact our Tech Support Line for further information at...

Fuel Pump Lock Ring Seal If you find yourself replacing a fuel pump, now is the time to replace the lock ring seal as well. This is an OE fuel pump lock ring seal to help you through the job. Contact our Tech Support Line for further information...