Silicone Adapter (2.5 “ I.D. to 3.0″ I.D.) Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...

Crush Washer This Crush Washer is a stock replacement for the worn out ones on the Cold Start Injector on Toyota engines. Sold as each. You will need (2) for each cold start injector. NOTE: Sold individually. Contact our Tech Support Line for...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

ORB -06 To AN -06 Male Fitting Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any...

OEM Throttle Body Elbow/Hose (Rubber) This rubber elbow is an OEM part from Toyota, from the intake to the throttle body. This elbow tends to crack with normal wear and tear, especially in extreme climates. OEM Toyota Part #: 22231-35030 NOTE: ...

Union Bolt (Fuel Rail) LC Engineering offers this M14 x 1.25 replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails. Contact our Tech Support Line for further information...

Fuel Union / Banjo Bolts This fitting will be used on both sides of the 22re fuel filter. OEM Toyota Part #: 90401-12097 NOTE: The threads of these fittings are metric M12 x 1.25. Contact our Tech Support Line for further information at...

Anodized Fuel Rail (Silver) LC Engineerings CNC-machined anodized fuel rails are perfect for that show truck looking to get the "edge" on the competition when the hood is popped. The fuel rails feature OEM factory mount locations to allow anyone who...

22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...

Silicone Vacuum Hose (3mm / 6mm / 8mm / 10mm ) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the...

Silicone Vacuum Hose Kit (Blue / Red / Black / Yellow) Replace your car's vacuum hoses with silicone hoses and eliminate power robbing vacuum leaks. Our hose kits use the finest silicone hose available and should last the life of your truck. This is...