Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Oil Pan Hardware Kit (Silicone Seal) This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with silicone seal pans only. This kit will not work with gasket...

Flexplate Bolt Kit (OEM) Connect that flexplate with confidence. These OEM flexplate bolts are just what the doctor ordered to connect your flexplate to your engine. They have a black oxide finish to help resist rust and corrosion. Recommended to be...

Hardware Kit (Exhaust Flange) Exhaust hardware kit used on the two-bolt collectors in the header and exhaust kits. Kit Includes: (4) Mechanical locking nuts (M10 x 1.25mm) (4) Flange Bolts (M10 x 1.25mm x 40mm grade 10.9) NOTE: All hardware is...

OEM Main Bolt (Cam Bolt) This is a brand new OEM Toyota main bolt. Ironically this is the same bolt used to hold the cam gear and distributor drive gear onto the front of the cam. Quantity 10 used for crank main caps.OEM Part #:...

Oil Drain Plug (Small) The LCE 20R/22R small oil drain plug is manufactured from high-quality materials to handle the most challenging conditions. LCE drain plugs and gaskets are the quality parts you need to do your job right. The head is 14mm, and...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Oil Drain Plug (14mm X 1.50 Replacement Aftermarket Pan) This LCE 20R/22R replacement oil drain plug is used for some aftermarket oil pans. Specifications 17mm Head N14-1.50 Thread Pitch NOTE: Gasket is not included, see Part #: 1013116 for...

OEM Distributor Hold Down Bolt As we all know, we tend to lose or misplace at least one bolt or nut when we are working on our vehicles. Well if you misplaced or damaged the distributor bolt, don’t worry we have you covered! This is an OEM...

OEM Bellhousing to Block Alignment Pin (1978-2016 4Runner/Celica/FJ Cruiser/Pickup) OEM Bellhousing to Block Alignment Pin. OEM Toyota Part #: 90250-10113 Contact our Tech Support Line for further information at 928-575-2174. Note:...