Toyota 4Runner 3rd Gen (1996-2002) Brake Upgrade Kits
Brake upgrades for the 1996, 1997, 1998, 1999, 2000, 2001 and 2002 Toyota 4Runner: the StopTech 6 piston front big brake kit, cross drilled and slotted rotors, ST60 pads, and valves for custom brake plumbing. The StopTech kit is listed for 1998 to 2002 4Runners on 16 inch or larger wheels, and the rotors are sold by wheel size.
Cross Drilled Slotted Rotors
A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your...
Cross Drilled Slotted Rotors
A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your...
Hawk Performance Brake pads | StopTech ST60 6-Piston Big Brake Kit
Restore and upgrade the stopping power of your big brake kit with premium performance brake pads engineered specifically for the...
StopTech Sport High-Performance Brake Pads
Upgrade or refresh the stopping power of your StopTech Big Brake Kit with these premium replacement brake pads. Specifically engineered to fit the massive...
Wilwood Proportioning Valve
(Adjustable)
This light and tidy, knob-type proportioning valves can be installed almost anywhere in the brake lines. They allow you to tweak brake bias in big or little...
Line Lock
(Mechanical)
This mechanical line lock will allow you to use your normal brake hydraulics to hold your brakes locked. You plumb your rear brake line through this line lock and then you...
Residual Valve
(2 PSI)
When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to...
Swagelok
(1/8" NP Male To 3/16" Tubing)
These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go...
Brake Line Clip
This is the OE clip that holds the female side of the brake line into the mounting bracket (sold each).
OEM Toyota Part #: 90468-A0007
Contact our Tech Support Line for...
The StopTech 6 Piston Front Big Brake Kit, engineered by SOS Performance, replaces the factory front brakes with StopTech ST60 6 piston calipers in red, black or silver, 323mm TRD Aero rotors in plain, drilled or slotted, and hard anodized 6061 T6 aluminum caliper brackets, for both sides. It needs 16 inch or larger wheels, and it is listed for the 1998 to 2002 4Runner, the 1996 to 2004 Tacoma and the 2000 to 2006 Tundra.
When the pads wear, the StopTech Sport pads and the Hawk Performance pads both fit the ST60 caliper, in a street ceramic or a more aggressive sport compound. Each order is a full front axle set of four pads.
Rotors: Check Your Wheel Size First
The 3rd gen 4Runner came with two front rotor sizes, 11.69" (297mm) and 12.55" (319mm), and which one your truck has follows its wheel size. These cross drilled and slotted rotors from Brake Performance are listed by wheel:
Rotors for 16 inch wheels: the larger 12.55" rotor, for November 1995 to 2001 4Runners with the 3RZ or 5VZ. Sold as a pair.
Rotors for 15 inch wheels: for November 1995 to 2002 4Runners with the 5VZ on 15 inch wheels, and the 1995 to 2004 Tacoma 6 lug.
Drilling and slotting take weight out of the rotor, help it shed heat and vent the gases that come off the pads, which means less fade after repeated hard stops.
Valves and Fittings for Custom Brake Work
Wilwood adjustable proportioning valve: set brake bias front to rear with a knob, reducing pressure by up to 57%. A common part in a rear disc conversion.
2 lb residual valve: holds light pressure on the rear line after a drum to disc conversion, so the pedal stays firm instead of needing a pump.
Swagelok fittings: 1/8" NPT to 3/16" line, flaring the line as they tighten, which makes plumbing in valves and line locks much easier.
Mechanical line lock: holds the brakes locked using your normal hydraulics. Off road use only; it does not replace a parking brake.