-
2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...$13.87 -
Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...$4.14 -
Enhance your vehicle’s power and sound with the 2 1/2" Pro Flow Muffler! Used in all LCE Pro Flow Exhaust Systems, this performance muffler is built with trusted MagnaFlow technology for maximum durability and performance. The 14-inch muffler...$140.07 -
Upgrade your exhaust system with the 2 1/4" Pro Flow Performance Muffler—a direct replacement for power and sound enhancement. This is the same MagnaFlow muffler featured in all LC Engineering Pro Flow Exhaust Systems, renowned for their durability...$140.07 -
Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that "old school" sound, or we have used them as a resonator to quiet down your existing exhaust system. The 18" length is perfect for adding this resonator in conjunction...$42.80 -
Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...$42.80 -
Looking for a quieter yet performance-oriented exhaust upgrade? The 2 1/2" Pro Flow Muffler (18") is your solution! Featuring the same top-tier MagnaFlow construction found in all LCE Pro Flow Exhaust Systems, this muffler is built for drivers who want...$154.42 -
Resonator (w/ Inlet & Outlet Flanges) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system for a quieter tone. This resonator features a high temp long...$117.78 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.16 -
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84
-
fast shipping
Speed Delivery