Seal Saver (Front of Crankshaft) Do you have a pesky oil leak coming from the harmonic balancer? Don't just keep swapping out front seals. LC Engineering carries this seal saver that slides right over the snout of the crankshaft and rides between the...

Rear Main Seal OEM replacement rear main seal. This will install on the big end of the crankshaft. If there is a large groove on the crank seal surface be sure to get our seal saver for trouble-free installation. For the Seal Saver, see Part #:...

MLS Head Gasket Set (Stock Replacement) MLS gaskets remain the automotive industry's preferred method of sealing between the cylinder head and engine block, as yet unmatched by any other sealing system. Today an estimated 80 percent of new engines are...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Seal Saver (Rear Main Seal) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank...

MLS Head Gasket (96mm Bore x .040" Thick) This head gasket is the best one for a stock bore of 95mm and the next step of 95.5mm for naturally aspirated or boosted engines. Match this head gasket with our head stud set for the maximum in sealing with...

MLS Head Gasket (96mm Bore x .051"Thick) The cylinder head gasket is arguably the most critical seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this significant...

Oil Pump Crankshaft Front Seal New OEM quality Oil Pump Crankshaft Seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at...

Valve Cover Gasket Set These valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to...

OEM Pick-Up Tube Gasket (Oil Pan) This gasket seals the oil pickup to the block. Guarantees the oil makes it into the pump instead of leaking back into the pan. OEM Toyota Part #: 15147-75020 Contact our Tech Support Line for further...

Water Pump Gasket (OEM) Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Oil Filter Housing Seal Kit (OEM) When removing the oil filter housing, it is always a good idea to replace these two O-ring seals. Any leak in this area can contaminate the system and affect oil pressure, not to mention the mess in the engine...