-
Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...$39.99 -
Upper Gusset (Solid Front Axle) This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...$39.99 -
3 Hole Spring Perches When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches...$39.99 -
Differential Stud Eliminator Kit When you come home after a trail ride, do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do you have to tap and drill the studs out and replace...$39.99 -
Knuckle Felt Protector Kit (Rock-Ring) We have had a lot of people tell us they don't like the stock inner felt plates because they are so thin and are easily damaged in the rocks. Well check out this trick solution... super heavy duty rings made from...$39.99 -
Weld-In Frame Gusset (Web) Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$39.99 -
Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...$39.99 -
Shock Mounts These shock mounts are designed to weld directly on to the Rock Assault™ Front Axle Housing. NOTE: Sold as a pair. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...$39.99 -
Chromoly Interlocking Tube Clamps (1" OD .065" Wall Thickness) Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s...$39.99 -
Rock Assault Front Axle Truss The Rock Assault™ Front Axle Truss will weld onto the top of your Rock Assault™ Front Axle Housing for extra protection against bending during competition or other extreme applications. The Rock Assault™ Front Axle Truss...$39.99 -
Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...$39.99 -
Hi-Lift Jack Mount (Trail Gear) Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole...$39.99
-
fast shipping
Speed Delivery