-
Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal...$27.84 -
Front Axle Torque Arm Bushings Stock rubber bushings are subject to the same deterioration problems as other rubber products. This causes control problems associated with road wander. Gain...$27.53 -
CNC-Machined External Wastegate Block-Off Plate Streamline your turbo setup with precision. Our CNC-machined Wastegate Block-Off Plate is the professional solution for builders switching from an...$27.48 -
OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the...$26.66 -
Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting...$26.58 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket.    Contact our Tech Support Line for further information at...$26.33 -
Intake Manifold Gaskets LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket...$26.09 -
Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust...$25.14 -
Flip Socket (19mm / 21mm) For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard...$24.99 -
Weld-On Attachment Point (Flat) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded...$24.99 -
Weld-On Attachment Point (Coped) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded...$24.99 -
Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock...$24.95
-
fast shipping
Speed Delivery