Vintage restoration and OEM-replacement parts for the Toyota Trekker — the rare 22R-powered Winnebago/Toyota collaboration that predated the 4Runner nameplate. Engine components, body, suspension, and the hard-to-find pieces that keep these original Trekkers alive.
Injector Harness Adapter
(Denso to Bosch EV1)
This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the...
2-Bolt Wastegate Flange
(You Choose Style)
All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. These 2-bolt flanges fit most 38mm...
Trail-Gear Shift Knob 4WD/2WD
Upgrade or replace your worn-out factory hardware with the Trail-Gear Rubber Shift Knob. Designed for durability and a comfortable grip, this knob is the perfect...
Recessed 10mm Allen Socket
(3/8" Drive)
This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs, see Part #'s:
2053160 and
Steering Box Fitting
(High Pressure)
This special fitting is used to connect the high pressure steering hose to the steering box.
9/16-18 JIC (-6) to M16-1.5 Adapter for IFS Steering Box
Â
This...
Toyota Exhaust Flange Hardware Kit
Refresh your exhaust hardware with this premium, high-strength replacement kit. Specifically designed for two-bolt collectors found in headers and aftermarket...
Rear Inner Axle Seal
Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you...
OE Replacement 22RE PCV Hose
Restore proper crankcase ventilation and eliminate rough idling or vacuum leaks with this premium Original Equipment (OE) style PCV hose. Over time, heat cycles and oil...
Gasgacinch
(Gasket Sealer 4 oz.)
There's nothing else that compares with the performance of Gasgacinch. It lasts longer and prevents leaks that others can't. The 4 ounce can offer the best option...
Gasket Set
(Weber Adapter)
Avoid or fix annoying vacuum leaks by replacing the gaskets between the plates the Weber 32/36 and 38 carb adapter. Over time gaskets become brittle and break. We...
OE Wheel Bearing Grease Seal
(Front Hub)
Fits in the back side of the front IFS hubs, will be needed anytime you repack or replace front wheel bearings. You will need two seals in order to do your...
Stainless Steel Air Injection Port Cover
Eliminate the cluttered look of factory emissions hardware with our Premium Stainless Steel Air Injection Block-Off Plate. Designed for enthusiasts who demand...
The Toyota Trekker (1981–1983) is one of the rarest production vehicles Toyota ever sold in the U.S. market. It was built in partnership with Winnebago Industries — Winnebago took short-bed 1st gen Toyota Pickups and converted them into enclosed SUVs with fiberglass camper-style tops. The Trekker was the proof-of-concept that led Toyota to launch the dedicated 4Runner nameplate in 1984 with a factory-built version of the same idea.
Surviving Trekkers carry the 22R 2.4-liter carbureted four-cylinder — the same engine LCE has been building 22R/22RE parts for since 1985. Our 22R catalog applies directly to Trekker engine work: long blocks, rebuild kits, Weber carburetor conversions, header kits, and OEM-spec replacement components. For body, suspension, and the Winnebago-specific fiberglass components, our technical team can help source or fabricate parts that are no longer available through standard channels.
Browse Trekker parts above, or jump to related content: