Vintage restoration and OEM-replacement parts for the Toyota Trekker — the rare 22R-powered Winnebago/Toyota collaboration that predated the 4Runner nameplate. Engine components, body, suspension, and the hard-to-find pieces that keep these original Trekkers alive.
Rear Outer Axle Seal
(Rubber)
Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time...
Front Frame Shackle Bushings
For high-performance applications, the combination of heavy duty or performance leaf springs and HYPER-FLEX performance polyurethane spring bushings deliver the maximum...
2-Bolt Flange
(You Choose Size)
2 1/4" Flanges:
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8"...
Thermostat
(160 Degree)
There is really only one reason to run this thermostat. Race tracks that require vehicles to run water, no coolant, this is the thermostat you need. We would not recommend...
Rubber Tailpipe Hanger
(3-Hole)
Factory 3 Hole replacement rubber insulator for tailpipe.
Contact our Tech Support Line for further information at 928-575-2174.
High-Pressure Radiator CapÂ
The LC Engineering Large Radiator Cap is a critical component for maintaining the correct pressure in your Toyota’s cooling system. Measuring 2-1/4" (57mm) in diameter,...
Oil Pan Mounting Hardware Kit
This complete oil pan hardware kit includes all the high-quality bolts and washers needed to properly install both your oil pan and the oil pickup tube.
Â
Important...
OEM EGR Crossover Gasket
OEM Gasket for that EGR Crossover plate located on the back side of the cylinder head.
OEM Toyota Part #: 11182-35050
Contact our Tech Support Line for further...
Glowshift Single Gauge Console Dashboard Pod
GlowShift's Universal Single Gauge Console Dash Pod is a single gauge pod designed to mount on your vehicle's dashboard and will house (1) 2 1/16"...
2-Bolt Wastegate Flange
(You Choose Style)
All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. These 2-bolt flanges fit most 38mm...
Injector Connector
So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or...
Injector Harness Adapter
(Denso to Bosch EV1)
This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the...
The Toyota Trekker (1981–1983) is one of the rarest production vehicles Toyota ever sold in the U.S. market. It was built in partnership with Winnebago Industries — Winnebago took short-bed 1st gen Toyota Pickups and converted them into enclosed SUVs with fiberglass camper-style tops. The Trekker was the proof-of-concept that led Toyota to launch the dedicated 4Runner nameplate in 1984 with a factory-built version of the same idea.
Surviving Trekkers carry the 22R 2.4-liter carbureted four-cylinder — the same engine LCE has been building 22R/22RE parts for since 1985. Our 22R catalog applies directly to Trekker engine work: long blocks, rebuild kits, Weber carburetor conversions, header kits, and OEM-spec replacement components. For body, suspension, and the Winnebago-specific fiberglass components, our technical team can help source or fabricate parts that are no longer available through standard channels.
Browse Trekker parts above, or jump to related content: