Swagelok (1/8" NP Male To 3/16" Tubing) These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go into most brake accessory ports. The opposite end has a...

Wilwood Proportioning Valve (Adjustable) This light and tidy, knob-type proportioning valves can be installed almost anywhere in the brake lines. They allow you to tweak brake bias in big or little increments simply by twisting the large adjuster knob...

Rear Disc Brake Conversion (w/o Parking Brake) We now offer a disc brake kit for your 4WD Pickup and 4Runner! We had three goals in mind. It had to be strong, easy to install, and a complete kit. We think as you read on you will agree that all three...

Solid Axle Vented Rotor Upgrade (Front) This kit is designed to change the solid stock rotors that are found on the front straight axle 1980 to 1985 trucks or SAS using the stock Toyota front axle to the newer vented rotor. Includes the LC Engineering...

Line Lock (Mechanical) This mechanical line lock will allow you to use your normal brake hydraulics to hold your brakes locked. You plumb your rear brake line through this line lock and then you simply press the line lock button down while pushing your...

Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...

Front Brake Pads Need and inexpensive way to stop your Toyota truck. Try these Premium Semi-Metallic asbestos-free front replacement brake pads. This pad is for use with the late-model IFS 4WD calipers. If you are adding the vented rotors and upgraded...

Custom Brake Line (Upgrading to 1" Bore Master Cylinder) Because we know how much everybody hates making custom brake lines, this line comes ready to plug and play. It will bolt right onto your new 1" Bore Master Cylinder with no major modifications...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller calipers. If you're installing a solid front axle on an...

26" Extended Brake Line Kit (2 Front / 1 Rear) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...