-
Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...$42.80 -
Looking for a quieter yet performance-oriented exhaust upgrade? The 2 1/2" Pro Flow Muffler (18") is your solution! Featuring the same top-tier MagnaFlow construction found in all LCE Pro Flow Exhaust Systems, this muffler is built for drivers who want...$154.42 -
Resonator (w/ Inlet & Outlet Flanges) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system for a quieter tone. This resonator features a high temp long...$117.78 -
Heat Riser Tubing (1.5" x 36") This heat riser tubing is just what you need if you need to keep the choke plate on your carbureted engine hooked to the exhaust for emissions purposes. This tubing goes from the heat shield on the exhaust manifold to the...$37.20 -
Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...$76.43 -
Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...$18.16 -
U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...$46.85 -
Rock Ripper Header Kit Trail-Gear has raised the bar yet again in the Toyota Off Road Industry with the newest addition to its product line, stainless steel, 50 state legal Toyota header. Trail Gears header features 100% polished stainless steel 1/16"...$713.04 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$25.90 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...$8.52 -
Exhaust Manifold Stud and Nut When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on your truck may...$4.12
-
fast shipping
Speed Delivery