Differential Drop Spacer Kit
(w/o Sway Bar)
One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint spacer lift etc...) the differential stays in the stock location. This can cause a lot of added stress and wear to your axles and CV joints. The easy way to eliminate this issue is with LC Engineering's differential drop spacer kit. This kit will lower your differential down by 1" and put your CV joints back to an acceptable angle and allow them to be stronger and more durable.
LC Engineering offers the differential drop spacer kit in two different configurations. One kit will lower the differential and the sway bar. The other kit will lower the differential only. If you are going to retain your sway bar then you will need the kit with the sway bar drop spacers. You can't drop the differential without removing or lowering the sway bar, the sway bar will interfere with the lowered differential.
NOTE: You must drop or remove the sway bar when installing the differential drop spacer kit.
Alternative Kit: Differential Drop Kit w/Sway Bar, see Part #: 2051250.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.