Home > ENGINE > TOP END > Valve Train Components > Valve Springs >

Dual Spring & Titanium Retainer Kit-20R/22R/RE/RET
Dual Spring & Titanium Retainer Kit-20R/22R/RE/RET


 
Our Price: $198.95

NOTE:: Usually Ships in 1 to 2 Business Days
Part Number: 1023210
Qty:

Details
 

Pro Dual Valve Spring & Titanium Retainer Kit - 20R/22R/RE/RET Includes: Dual Valve Springs, Spring Shims &Titanium Retainers

LC Engineering has taken the guesswork out of choosing the right parts for your cylinder head! We have created a spring & retainer kit that comes with all the parts needed to upgrade your 20R/22R/RE/RET cylinder head to a dual spring set-up. The kit contains our Pro Dual Valve Springs, Titanium Retainers & Spring Shims.

Pro Dual Valve Springs
The Pro Dual Valve Springs are a "must have" upgrade when running bigger lift cams and higher RPM's. With 110lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work perfectly with any naturally aspirated or boosted applications. These springs are rated up to 8,500 RPM and will accommodate cam lifts up to .550"!

Titanium Retainers
These titanium retainers are necessary when running dual springs. The special design of these retainers will actually preload the inner spring to make sure you get the correct spring pressure and location. The lightweight titanium material allows the valves to open and close faster and more consistent by reducing the drag and load on the springs. The titanium also provides superior strength and durability which means your engine can rev faster and higher than ever with no reliability worries.

Note:
LC Engineering also offers this kit with chromoly retainers. Check out part #1023211.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.


Average Customer Review: 5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
Perfect fit May 3, 2017
Reviewer: MARK VOGEL from SANFORD, FL United States  
Perfect fit .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Positive feedback April 18, 2017
Reviewer: Jose Nieves from Vega Baja, Vega Baja Puerto Rico  
Excellent service! Thanks a lot!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Initial Assesment January 21, 2015
Reviewer: Joe Atkinson/Atkinson Motorsports from Phoenix, AZ United States  
Good quality

Was this review helpful to you?

  1 of 3 people found the following review helpful:
 
Dual Spring September 18, 2013
Reviewer: Ronicko Joe Cabe from Barrigada, Guam  
*****

Was this review helpful to you?


Browse for more products in the same category as this item:

ENGINE > TOP END > Valve Train Components > Valve Springs